Products in this range:
V & VP Series
V (AN01)
Two-part V anchors for castable linings with removable backing for easy coil removal after setting.
VP (AN02)
Preassembled V anchors with integrated plate for quick installation in dense refractory mixes.
VCL (AN03)
V anchors fitted with ceramic ferrules to stabilize arc stud welding and ensure precise collar formation.
VCP (AN04)
V anchors combined with spring‐loaded washers to accommodate thermal expansion and compression.
Y Series
YCL (AN05)
Y-shaped anchors with ceramic liners for enhanced weld consistency and reduced heat impact.
YCP (AN06)
Y anchors supplied with insulating caps for secure brick retention and simplified installation.
FCY (AN08)
flat collar Y anchors designed for thin linings and minimal protrusion behind the surface.
YD2X (AN17)
dual‐leg Y anchors offering extra holding power in high‐stress areas and thick porcelain linings.
Split Tyne (AN24)
Anchors with split prongs that expand under load to lock lining into place without additional hardware.
SCH (AN27)
Shear clip anchors that bend upon installation to form a secure hold in lightweight refractories.
SHP (AN28)
Two‐part shear pin anchors for controlled anchorage and easy removal of residual parts.
CFF Pin (AN41)
Carbide‐tipped fur pins for high‐abrasion zones, offering extended wear life.
Rotalock & SV Series
Rotalock System (AN29)
Rotary expansion anchors that mechanically lock into the substrate for rapid on‐site installation.
SVP (AN25)
Threaded stud anchors combining V geometry with a plate and nut assembly for demolition‐resistant fixings.
SVC (AN26)
V anchors with welded caps for seamless integration in gunned or cast linings.
Specialty Anchors & Pins
YX‑CVCP Anchor (AN18)
Composite Y anchors with ceramic‐lined head and spring washers for dynamic heat movement.
Drive in Anchor (AN20)
Push‐in anchors with tapered shank for mechanical hold in precast sections without welding.
Spear Lock Anchor (AN42)
Anchors with spear head design for precision penetration and secure embedment in dense castables.
Stack Studs
Multi‐layer stud assemblies for thick lining applications, providing graded flexibility and load distribution.
Expertise
Anchors Matched to Operating Conditions
We review lining type, operating temperature, and support geometry to recommend anchor style and alloy. Preassembled assemblies and custom lengths arrive site ready, and our field team assists with installation best practices and inspection criteria.
